Introduction:
In recent years, as the water treatment technology for protecting the limited water resources and precious environment, the membrane technology which is used to implement the reclaimed water utilization is attracting an extensive attention on a global scale. Besides the reduction of environmental load by improving the treated sewage quality, the membrane system is widely applied in sewage reuse and surface water advanced processing. In order to solve the problem of severe water shortage, the ultrafiltration and micro-filtration membrane technology is being widely used in the world.
PTFE immersed curtain membrane series products produced by DongYang HanChen Membrane Technology Co., Ltd. have the characteristics of high flux, high corrosion resistance, high strength and convenient maintenance, being applicable for different scales of industrial waste water treatment, domestic sewage treatment, reclaimed water reuse, surface water advanced purification treatment, sea water desalination and other projects.
Model |
HCPTFE-12-111 |
HCPTFE-15-139 |
HCPTFE-20-185 |
Module size(L*W*H) |
1210*535*45mm |
1490*535*45mm |
1950*535*45mm |
Module membrane area |
12M² |
15M² |
20M |
Interception pore diameter |
0.1-0.2µm |
0.1-0.2µm |
0.1-0.2µm |
ID and OD of membrane fiber |
1.3mm / 2.3mm |
1.3mm / 2.3mm |
1.3mm / 2.3mm |
Tolerance range of temperature |
0-75℃ |
0-75℃ |
0-75℃ |
Tolerance range of PH value |
2-12 |
2-12 |
2-12 |
Design flux |
204-300 L/㎡h |
255-375 L/㎡h |
340-500 L/㎡h |
Max transmembrane pressure (TMP) |
0.2MPA |
0.2MPA |
0.2MPA |
Type of water output |
Negative pressure suction |
Negative pressure suction |
Negative pressure suction |
Material |
Eptfe membrane & ABS cartridge |
||
1. Technical parameters in the table are factory inspection value under standard testing conditions; 2. The flow is producing water flow when the product is used in MBR sewage treatment. |
http://www.hceptfe.com/